Vehicle graphics
Caring for Your Vehicle Wrap
The vinyl sign business comes from pin-striping; a wrap is basically the same material, just a lot bigger. Here is how to get the vehicle ready and how to treat the graphics after, in our words.
All About the Signs
Caring for your vehicle wrap
- Before install day
Before install day
Clean the vehicle with soap and water only, through a car wash or by hand.
No wax, and no Armor All or tire treatments. They keep the vinyl from adhering properly and are hard to detect during the install.
- Washing
Washing
A vehicle with a full wrap, full-color graphics or cut vinyl can go through a car wash and be cared for like a vehicle without graphics.
- Waxing
Waxing
Do not wax full-color vinyl graphics. There is no reason to.
- Parking
Parking
Vinyl is more sensitive than factory paint; it will scratch and dent. Use your best judgment in a full parking lot.
- When it is time to remove
When it is time to remove
Heat is applied to the graphics and they are removed by hand. The surface is then cleaned with alcohol and a lint-free microfiber cloth to lift any adhesive left behind.
Full wraps are made to be removed and protect the paint under them. Older cut vinyl can leave ghosting, depending on its age.
Questions about your graphics? Call All About the Signs at(615) 391-9978· AllAboutTheSigns.net